+
  • 22AudiA7L (1).png
  • 22AudiA7L (2).png
  • 外购大众锁.png
  • EP12撑杆.jpg

2022 Audi A7L, Corepine Smart Electric Tailgate System Kit


Category:


Get Quote

Share to

 

2. Product List

 

3. Installation Method

1. Remove the tailgate trim panels.

2. Remove the trunk trim panels.

 

3. Remove the gas strut and the spring from the left side of the trunk.

 

4. Remove the spring from the right side of the trunk.

 

5. Locate the mounting hole of the ball stud.

 

6. Insert the nut with a handle through this hole to secure the ball stud.

 

7. Install the ball stud on the right side of the trunk.

 

8. Install the ball stud on the right hinge.

 

9. Install the left electric strut at the position of the original gas strut, and pay attention to the direction.

 

10. Install the right electric strut at the position of the original gas strut, and pay attention to the direction.

 

11. Hang the left and right springs back.

 

12. Route the left and right strut wiring harnesses through the hinges to the tailgate.

 

13. Remove the plastic housing from the tailgate.

 

14. Mount the three provided fixing rings onto the housing (if it is difficult, use a knife to scrape the holes).

 

15. Install the lock actuator.

 

16. Connect the connectors of the lock signal harness to the original tailgate switch.

 

17. Put the plastic housing and the lock actuator back.

 

18. Assemble the lock latch and the cable together.

 

19. Install the lock latch together with the fixing device and mount the original lock cable onto it.

 

20. Mount our lock cable onto the power latch.

 

21. Connect the connectors of lock signal harness to the latch and the actuator.

 

22. Connect the connector of lock signal harness to the added tailgate switch.

 

23. Route the power harness.

 

24. Ground at the left side of the trunk.

 

25. Check all the connectors and the emergency cable.

 

26. Connect to the fuse box for power supply (all the vacant slots are constant power).

 

27. Plug the fuse tap into the fuse box with wire pointing to the right.

 

28. Use a φ6mm drill bit to drill a hole at the indicated positionfor the the installation of the ECU.

 

29. Insert the strut wiring harnesses ①②, lock signal harness ③, and power harness④ into the ECU in sequence and mount the ECU onto its bracket.

 

30. Check whether the lock assembly and the electric struts function well.

 

31. Test each function of the electric tailgate.

 

32. Stick the hole template to the indicated position of the tailgate.

 

33. Reinstall all the trim panels and fit the added switch in.

 

4. System initialization method


1. Press the added tailgate switch button to make the tailgate close automatically;
2. Press the switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.

 

5. Instructions for the electric tailgate


1. Methods to open and close the tailgate:
●Press the tailgate button on the remote key 2 times;
●Pull up the tailgate button in the driver's area;
●Press the original tailgate switch button;
●Press the added tailgate switch button.

2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.

3. Method to memorize the height:
Open the tailgate to the height you want to set, long press the added tailgate switch, and release the switch after  hearing a long "beep ----" . The height memory is complete.
Tip: During the operation of the tailgate, pause the tailgate, and then push the tailgate to the ideal height with your hand.

 

6. Meanings of the buzzer sound:


"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on;
Long sound of "beep": The height memory is complete.

Keywords:

2022 Audi A7L, Corepine Smart Electric Tailgate System Kit

Get a Free Quote

*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible

SUBMIT NOW