Power Running Board
No data

2. Product List

3. Installation method

1. Remove the tailgate and hinge trim panels.

2. Remove the indicated trunk panels.

3. Remove the springs on both sides.

4. Pass the two nuts with handle through the indicated two holes.

5. Install the left body bracket.

6. Install the right body bracket.

7. The two hole under the bump stop are for the installation of the tailgate bracket.

8. Install the right tailgate bracket according to the indicated bolts.

9. Illustration of the installed right tailgate bracket.

10. Install the left tailgate bracket according to the indicated bolts.

11. Illustration of the installed left tailgate bracket.

12. Remove the damping rod.

13. Install the electric struts, L on the left and R on the right (the first letter of the strut code).

14. Route the strut wiring harness along with original wires to the left side of the trunk.

15. Remove the original latch and the emergency cable.

16. Remove the indicated female connector from the power latch.

17. Fit the emergency cable onto the power latch.

18. Install the power latch.

19. Connect the connectors of the lock signal harness to the power latch.

20. Remove the indicated cover.

21. Connect the connectors of the lock signal harness to the original tailgate switch and reinstall the cover.

22. Hide the emergency wires under the rear left door sill panel.

23. Route the lock signal harness to the left side of the trunk.

24. Ground at the left side of the trunk.

25. Remove the spare tire.

26. Remove the spare tire bracket.

27. Connect to the battery for constant power.

28. Secure the ECU at the indicated location with a nut.

29. Insert the left and right strut wiring harnesses①②, lock signal harness③, and power harness④ into the ECU in sequence.

30. Check if the power latch and the struts function well.

31. Press the added tailgate switch to close the tailgate once, the system completes initialization, and then test each function of the electric tailgate.

32. Stick the hole template to the indicated position, pay attention to align with the reserved empty space and open a hole for the added tailgate switch.

33. Install the added tailgate switch and reinstall all the trim panels.
4. System initialization method
1. Press the added tailgate switch button, and the tailgate will close automatically;
2. Press the tailgate switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.
5. Instructions for the electric tailgate
1. Methods to open and close the tailgate:
●Press and hold the tailgate button on the remote key;
●Press the tailgate button in the driver's area;
●Press the original tailgate switch button;
●Press the added tailgate switch button.
2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.
3. Instructions for the added tailgate switch
①Height setting
Press and hold the switch button on the tailgate. Release it after hearing one long beep — the height has been successfully memorized.
Tip: During tailgate operation, pause it, then manually push the tailgate up to the desired height.
②Closing speed-up
Press and hold the switch button on the tailgate. Release it after hearing two short beeps — the closing speed-up function has taken effect.
(There are five speed levels. Repeat this step to increase the level by one.)
③Opening speed-up
Press and hold the switch button on the tailgate. Release it after hearing three short beeps — the opening speed-up function has taken effect.
(There are five speed levels. Repeat this step to increase the level by one.)
④Braking force increase (Retention force for open)
Press and hold the switch button on the tailgate. Release it after hearing one long beep and one short beep — the braking force has been increased.
(There are five levels. Repeat this step to increase the level by one.)
⑤Switch reminder sound toggle
Press and hold the switch button on the tailgate. Release it after hearing one long beep and two short beeps — the switch reminder sound toggle has taken effect. (Default is silent. Repeat the setting to cycle through the options.)
⑥Enter the voice wake-up word and command word modification menu
Press and hold the switch button on the tailgate. Release it after hearing one long beep and three short beeps — the voice wake word and command word modification menu entered.
⑦Voice switch power-off toggle between 72 hours and 0.5 hours
Press and hold the switch button on the tailgate. Release it after hearing two long beeps and one short beep — the voice switch power-off toggle between 72 hours and 0.5 hours has taken effect.
④Braking force increase (Retention force for open)
Press and hold the switch button on the tailgate. Release it after hearing one long beep and one short beep — the braking force has been increased.
(There are five levels. Repeat this step to increase the level by one.)
⑤Switch reminder sound toggle
Press and hold the switch button on the tailgate. Release it after hearing one long beep and two short beeps — the switch reminder sound toggle has taken effect. (Default is silent. Repeat the setting to cycle through the options.)
⑥Enter the voice wake-up word and command word modification menu
Press and hold the switch button on the tailgate. Release it after hearing one long beep and three short beeps — the voice wake word and command word modification menu entered.
⑦Voice switch power-off toggle between 72 hours and 0.5 hours
Press and hold the switch button on the tailgate. Release it after hearing two long beeps and one short beep — the voice switch power-off toggle between 72 hours and 0.5 hours has taken effect.
⑫Toggle between 2-press and 3-press of the unlock button on remote key
Press and hold the switch button on the tailgate. Release the switch after hearing three long beeps and three short beeps — the toggle between 2-press and 3-press has taken effect. (Default is 3-press. Repeat this step to cycle through the options.)
⑬Toggle between quick/slow press of the unlock button on remote key
Press and hold the switch button on the tailgate. Release the switch after hearing four long beeps and one short beep — the toggle between quick press and slow press has taken effect. (Default is quick press. Repeat this step to cycle through the options.)
⑭Restore to factory settings
Press and hold the switch button on the tailgate. Release the switch after hearing five long beeps. The factory reset has taken effect.
6. Meanings of the buzzer sound:
"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on.
Keywords:
SHOP