+
  • 16Touran L.jpg
  • 16Touran L.png
  • 自制大众锁.png
  • EP11撑杆.png

2016-2022 Volkswagen Touran L ,Corepine Smart Electric Tailgate Lift System Kit


Category:


Get Quote

Share to

 

2. Product List

 

3. Installation method

1. Remove the indicated trim panel, door sill panel and storage box.

 

2. Remove the rear left door sill panel and B-pillar trim panel.

 

3. Remove the tailgate trim panels (there are screws in the circles).

 

4. Remove the trunk floor mat, door sill panel and the trim panel on the left side.

 

5. Connect the plugs of the lock signal harness to the plugs of the power latch.

 

6. Connect the plugs of the lock signal harness to the plugs of tailgate handle switch.

 

7. Remove the original latch and install our power latch.

 

8. Route the lock signal harness to the left side of the trunk.

 

9. Insert the lock signal harness terminals into the connector according to the diagram.

 

10. Remove the gas strut.

 

11. Replace the left body bracket.

 

12. Replace the right body bracket.

 

13. Replace the left tailgate bracket.

 

14. Replace the right tailgate bracket.

 

15. Install the electric struts, L on the left and R on the right (the first letter of the strut code).

 

16. Route the strut wiring harnesses as indicated.

 

17. Plug the holes on both sides.

 

18. Route the power harness as indicated.

 

19. Ground at the left side of the trunk.

 

20. The CAN box is behind the storage box. Connect the signal plugs to the CAN signal plug and its socket.

 

21. Plug the fuse tap into the indicated slot (seventh in the fourth row).

 

22. Secure the ECU bracket at the left side of the trunk.

 

23. Insert the left and right strut wiring harnesses①②, lock signal harness③, and power harness④ into the ECU in sequence.

 

24. Initialize the system once and test each function of the electric tailgate.

 

25. Reinstall all the trim panels and install the added tailgate switch (remove the original small cover).

 

4. System initialization method


1. Press the added tailgate switch button to make the tailgate close automatically;
2. Press the switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.

 

5. Instructions for the electric tailgate


1. Methods to open and close the tailgate:
●Press the unlock button on the remote key 3 times;
●Press and hold the tailgate button on the remote key;
●Press the unlock button at the driver's area 3 times;
●Press the tailgate handle switch button;
●Press the added tailgate switch button.

2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.

3. Instructions for the added tailgate switch
①Closing speed acceleration
Press and hold the added switch button on tailgate until hearing a beep sound. When the tailgate makes a short beep sound again, the close speed acceleration is complete. (There are five speed settings. Repeat this step once to increase by one setting.)

②Opening speed acceleration
Press and hold the added switch button on tailgate until hearing two beep sounds. When the tailgate makes two short beep sounds again, the open speed acceleration is complete. (There are five speed settings. Repeat this step once to increase by one setting.)

③Height setting
Press and hold the added switch button on tailgate until hearing three beep sounds. When the tailgate makes three short beep sounds again, the height setting is complete. Tip: During the operation of the tailgate, pause the tailgate, and then push the tailgate to the ideal height.

④Switch between quick/slow press of the unlock button on remote key
Press and hold the added switch button on tailgate until hearing four beep sounds. When the tailgate makes four short beep sounds again, the switch of pressing way is complete.

⑤Switch between pressing the unlock button twice/three times
Press and hold the added switch button on tailgate until hearing five beep sounds. When the tailgate makes a long beep sound, the switch of pressing times is complete.
⑥Braking force increase (Retention force for open)
Press and hold the added switch button on tailgate until hearing six beep sounds. When the tailgate makes two long beep sounds, the braking force increase is complete. (There are five speed settings. Repeat this step once to increase by one setting.)
⑦Restore to factory settings
Press and hold the added switch button on tailgate until hearing seven beep sounds. When the tailgate makes three long beep sounds, the reset is complete.

 

6. Meanings of the buzzer sound:


"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on;
Long sound of "beep": The height memory is complete.

Keywords:

2016-2022 Volkswagen Touran L ,Corepine Smart Electric Tailgate Lift System Kit

Get a Free Quote

*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible

SUBMIT NOW