+
  • 15Sienna (1).jpg
  • 15Sienna (2).jpg
  • 自制丰田锁.jpg
  • EP11撑杆.png

2015–2020 Toyota Sienna,Corepine Smart Electric Tailgate System Kit


Category:


Get Quote

Share to

2. Product list

3. Installation method

1. Add a reinforcing shim to the tailgate hinges and secure them with bolts.

 

2. Remove the indicated driver side trim panel and door sill panel.

 

3. Remove the middle door step board.

 

4. Take out the seat and remove the trim panel on the left side to allow wiring harness to pass through.

 

5. Remove the tailgate trim panels.

 

6. Remove the indicated screws from the power latch.

 

7. Remove the original latch and install our power latch.

 

8. Connect the connectors of the lock signal harness to the original tailgate switch.

 

9. Connect the connectors of the lock signal harness to the power latch.

 

10. Install the added tailgate switch.

 

11. Remove the original gas struts.

 

12. Replace the left and right brackets on the tailgate.

 

13. Replace the left and right ball studs on the car body.

 

14. Install the electric struts, L on the left and R on the right (the first letter of the strut code).

 

15. Thread the strut wiring harnesses through the holes into the tailgate and route the wiring harness as indicated.

 

16. Seal the holes on both sides of the tailgate securely.

 

17. Thread the power harness to the tailgate.

 

18. Insert the power harness terminals into the connector according to the diagram.

 

19. Route the power harness as indicated.

 

20. Ground at the left side of the tailgate.

 

21. Connect the power harness to the indicated signal plug and its socket beside the rest pedal.

 

22. Install the front switch button.

 

23. The fuse slot for constant power is indicated above.

 

24. Move the fuse from the fuse box to the fuse tap, plug the fuse tap into the fuse box and pay attention to the direction.

 

25. Drill a hole at the indicated position on the tailgate for installing the ECU.

 

26. Insert the left and right strut wiring harnesses①②, lock signal harness③, and power harness④ into the ECU in sequence.

 

27. Secure the ECU with a nut.

 

28. Press the added tailgate switch to close the tailgate once, the system completes initialization, and then test each function of the electric tailgate.

 

29. Reinstall all trim panels.

 

4. System initialization method


1. Press the added tailgate switch button to make the tailgate close automatically;
2. Press the switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.

 

5. Instructions for the electric tailgate


1. Methods to open and close the tailgate:
●Press the unlock button on the remote key 3 times;
●Press the unlock button in the driver's area 3 times;
●Press the original tailgate switch button;
●Press the added tailgate switch button to close;
●Press the added front switch button: press and hold for 4s to open and
  press once to close.

2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.

3. Method to memorize the height:
Open the tailgate to the height you want to set, long press the added tailgate switch, and release the switch after  hearing a long "beep ----" . The height memory is complete.
Tip: During the operation of the tailgate, pause the tailgate, and then push the tailgate to the ideal height with your hand.

 

6. Meanings of the buzzer sound:


"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on;
Long sound of "beep": The height memory is complete.

 

Keywords:

2015–2020 Toyota Sienna,Corepine Smart Electric Tailgate System Kit

Get a Free Quote

*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible

SUBMIT NOW