+
  • 20Noah90 (1).png
  • 20Noah90 (2).png
  • 自制诺亚90锁.png
  • EP11撑杆.png

2020-2022 Toyota Noah 90(RHD),Corepine Smart Electric Tailgate Lift System Kit


Category:


Get Quote

Share to

2. Product list

3. Installation method

1. Remove the tailgate trim panels.

 

2. Remove the front right side switch panel and door sill panel.

 

3. Remove the rear right door sill panel.

 

4. Remove the front left door sill panel and the trim panel on the right side of front passenger seat.

 

5. Remove the right side trim panel from the trunk to allow the wiring harnesses to pass through.

 

6. Remove the original gas struts.

 

7. Replace the left body bracket.

 

8. Replace the right body bracket.

 

9. Install the bracket on the left side the of the tailgate.

 

10. Install the bracket on the right side the of the tailgate.

 

11.Install the electric struts, L on the left and R on the right (the first letter of the strut code).

 

12. Drill a hole at the indicated position using a φ21mm drill bit to allow the strut wiring harness to pass through. Both sides are the same.

 

13. Route the left and right strut wiring harnesses to the tailgate.

 

14. Plug the holes on both sides of the tailgate with hole plugs.

 

15. Remove the original latch and install the power latch.

 

16. Connect the connectors of the lock signal harness to the power latch.

 

17. Connect the connectors of the lock signal harness to the original tailgate switch.

 

18. Remove the original small panel from the tailgate and install the added tailgate switch.

 

19. Route the power harness (Wire threading only, no plug or power connection).

 

20. Thread the power harness to the tailgate.

 

21. Insert the power harness terminals into the wiring harness connector according to the diagram.

 

22. Ground at the tailgate.

 

23. Connect the power harness to the signal plug and its socket beside the pedals.

 

24. Remove the blank button from the switch panel and install the front tailgate switch.

 

25. Connect the connectors of the front switch behind the switch panel.

 

26. Route the fuse tap of the power harness from the rear seat to the front passenger seat.

 

27. The fuse box is located in front of the passenger seat and the fuse slot for power supply is indicated above.

 

28. Move the original fuse from the fuse box to the fuse tap, then plug the fuse tap into the fuse box.

 

29. Place the ECU at the indicated location of tailgate and secure it with a nut.

 

30. Insert the strut wiring harnesses ①②,  lock signal harness ③, and power harness④ into the ECU in sequence.

 

31. Press the added tailgate switch to open and close the tailgate once, the system completes initialization and then test each function of the electric tailgate.

 

32. Reinstall all the trim panels.

 

4. System initialization method


1. Press the added tailgate switch button to make the tailgate close automatically;
2. Press the switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.

 

5. Instructions for the electric tailgate


1. Methods to open and close the tailgate:
●Press the unlock button on the remote key 3 times;
●Press the unlock button at the driver's area 3 times;
●Press the original tailgate switch button;
●Press the added tailgate switch button to close;
●Press the added front switch button: press and hold for 4s to open and
  press once to close.

2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.

3. Method to memorize the height:
Open the tailgate to the height you want to set, long press the added tailgate switch, and release the switch after  hearing a long "beep ----" . The height memory is complete.
Tip: During the operation of the tailgate, pause the tailgate, and then push the tailgate to the ideal height with your hand.

 

6. Meanings of the buzzer sound:


"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on;
Long sound of "beep": The height memory is complete.

Keywords:

2020-2022 Toyota Noah 90(RHD),Corepine Smart Electric Tailgate Lift System Kit

Get a Free Quote

*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible

SUBMIT NOW