+
  • 22BenZBClass (1).png
  • 22BenZBClass (2).png
  • 奔驰B级锁.png
  • EP11撑杆.png

2021-2022 Benz B-Class,Corepine Smart Electric Tailgate System Kit


Category:


Get Quote

Share to

 

2. Product list

 

3. Installation method

1. Remove the front passenger side door sill panel and floor mat.

 

2. Remove the rear right side door sill panels.

 

3. Remove the trunk floor mat and the trim panels on the right side of the trunk.

 

4. Remove the tailgate trim panels.

 

5. Remove the original gas struts.

 

6. Install the left body bracket.

 

7. Install the right body bracket.

 

8. Install the electric struts, L on the left and R on the right (the first letter of the strut code), making sure the ends with wiring harnesses are on the car body.

 

9. Thread the strut wiring harness through the indicated hole.

 

10. Route the strut wiring harnesses.

 

11. Plug the holes on both sides of the trunk securely.

 

12. Insert the strut wiring harness terminals into the wiring harness connectors.

 

13. Remove the original latch and connect the lock signal harness with the plugs of the power latch.

 

14. Install the power latch.

 

15. Connect the connectors of the lock signal harness to the original tailgate switch.

 

16. Connect the connector of the lock signal harness to the added tailgate switch.

 

17. Route the power harness (if you need to install the added front switch, route the switch wiring harness in the same way).

 

18. Route the power harness to the right side of the tailgate.

 

19. Insert the power harness terminals into the wiring harness connector.

 

20. Ground at the indicated location on the tailgate.

 

21. Connect the power harness to the indicated signal connectors  at the right side of the front passenger seat.

 

 

22. Check all the plugs.

 

23. Use the original wire connector to connect power from the fuse box under the floor mat of front passenger seat.

 

24. Remove the indicated cable clip.

 

25. Fix the ECU to the indicated hole.

 

26. Insert the strut wiring harnesses ①②, lock signal harness ③, and power harness④ into the ECU in sequence and then mount the ECU onto its bracket.

 

27. Press the added tailgate switch button to open and close the tailgate once for initializing the system, and then test each function of the electric tailgate.

 

28. Reinstall all trim panels and install the added tailgate switch (check whether the buttons can bounce back normally. If there is any interference, use a small knife to scrape off the interfering part).

 

(Optional) Find an appropriate position in the driver's area, drill a φ21mm hole and install the added front switch.

 

4. System initialization method


1. Press the added tailgate switch button to make the tailgate close automatically;
2. Press the switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.

 

5. Instructions for the electric tailgate


1. Methods to open and close the tailgate:
●Press the unlock button on the remote key 3 times;
●Press the unlock button at the driver's area 3 times;
●Press the original tailgate switch button;
●Press the added tailgate switch button;
●Press the added front switch button: press and hold for 4s to open and
  press once to close.

2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.

3. Method to memorize the height:
Open the tailgate to the height you want to set, long press the added tailgate switch, and release the switch after  hearing a long "beep ----" . The height memory is complete.
Tip: During the operation of the tailgate, pause the tailgate, and then push the tailgate to the ideal height with your hand.

 

6. Meanings of the buzzer sound:


"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on;
Long sound of "beep": The height memory is complete.

 

 

Keywords:

2021-2022 Benz B-Class,Corepine Smart Electric Tailgate System Kit

Get a Free Quote

*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible

SUBMIT NOW