+
  • 18LexusUX (1).png
  • 18LexusUX (2).png
  • 自制丰田锁.jpg
  • EP11撑杆.png

2018-2022 Lexus UX ,Corepine Smart Electric Tailgate Lift System Kit


Category:


Get Quote

Share to

2.Product list

3. Installation method

1. Remove the front left side trim panel and door sill panel.

 

2. Remove the rear left side door sill panel and B-pillar trim panel.

 

3. Remove the trunk floor mat.

 

4. Remove the trim panel on the left side of the trunk.

 

5. Remove the tailgate trim panels.

 

6. Thread the lock signal harness to the trunk.

 

7. Insert the lock signal harness terminals into the wiring harness connector and then fasten the connector inward.

 

8. Remove the original latch.

 

9. Remove the trim panel of the tailgate handle switch (remove the three screws first).

 

10. Connect the plugs of the lock signal harness to the tailgate switch (choose the proper pair of connectors according to different models).

 

11. Remove the screws from the power latch.

 

12. Install our power latch.

 

13. Install the added switch at the tailgate handle.

 

14. Connect the connectors of lock signal harness to the power latch and the added tailgate switch.

 

15. Remove the original gas struts.

 

16. Replace the left and right body bracket.

 

17. Replace the left and right tailgate brackets, and take care to differentiate between these two brackets.

 

18. Install the electric struts, L on the left and R on the right (the first letter of the strut code).

 

19. Drill a hole at the indicated location with a φ22mm drill bit to allow the strut wiring harness to pass  through. Both sides are the same.

 

20. Route the strut wiring harnesses through the tailgate to the left side of the trunk.

 

21. Route the power harness.

 

22. Ground at the left side of the trunk.

 

23. Connect the connectors of the power harness to the B-pillar signal connectors.

 

24. Replace the original switch with the added tailgate switch.

 

25. Remove the indicated fuse and plug it into the fuse tap.

 

26. Plug the fuse tap into the fuse box and pay attention to the direction.

 

27. Secure the ECU bracket at the left side of the trunk.

 

28. Insert the strut wiring harnesses ①②, lock signal harness ③, and power harness④ into the ECU in sequence.

 

29. Initialize the system once and test each function of the electric tailgate.

 

30. Reinstall all the trim panels.

 

4. System initialization method


1. Press the added tailgate switch button to make the tailgate close automatically;
2. Press the switch button outside the tailgate to open the tailgate and it will make a long sound of "beep".
3. The system initialization is complete.

 

5. Instructions for the electric tailgate


1. Methods to open and close the tailgate:
●Press the unlock button on the remote key 3 times;
●Press the unlock button in the driver's area 3 times;
●Press the original tailgate switch button;
●Press the added tailgate switch button;
●Press the added front switch button: press and hold for 4s to open and
  press once to close.

2. Method to pause the tailgate:
During the operation of the tailgate, press the button with any of the above methods, and the tailgate will be paused. Press again, and the tailgate will move in reverse.

3. Method to memorize the height:
Open the tailgate to the height you want to set, long press the added tailgate switch, and release the switch after  hearing a long "beep ----" . The height memory is complete.
Tip: During the operation of the tailgate, pause the tailgate, and then push the tailgate to the ideal height with your hand.

 

6. Meanings of the buzzer sound:


"Beep" once: Receiving an open/close or pause signal, the tailgate will immediately open/close or pause;
"Beep" twice: The tailgate has been fully opened or closed;
"Beep" three times:The resistance during opening or closing the tailgate is too large, and the intelligent anti-pinch has been turned on;
Long sound of "beep": The height memory is complete.

 

Keywords:

2018-2022 Lexus UX ,Corepine Smart Electric Tailgate Lift System Kit

Get a Free Quote

*Note: Please be sure to fill in the information accurately and keep the communication open, we will get in touch with you as soon as possible

SUBMIT NOW